Section 2: Diving with the Monitor 3 Air
32
Lost transmission
If the computer does not
receive data from the trans-
mitter, the antenna symbol is
displayed, accompanied by
two beeps. If this occurs
frequently, check the position
of the transmitter or com-
puter. If situation persists for
more than 40 seconds, air
information will no longer be
displayed.
High air consumption
When there is a significant
increase in the air consump-
tion, the warning icon
appears, accompanied by
two beeps. Relax and breathe
more slowly.
Microbubble warning (Atn)
This message is displayed when
the Monitor 3 Air calculates that
there is an excess of
microbubbles in your body
tissues. Do not dive while this
message is displayed. If you dive
while the message is displayed,
no-stop times will be reduced
and decompression times will be
longer.
Lost transmission
after 40 seconds
Summary of Contents for 150-2421 - Flatfoto 1.3-megapixel Digital Camera
