II. Function Introduction
2. Compare
It is used to check if the data on source Flash device is identical to the copied Flash
devices after duplication.
Steps of compare:
Plug Flash devices into duplicator→Select [2. Compare]→Press
[OK]→Compare
Processing→Compare finished→ Press
[ESC] to finish compare.
** Do not take out any Flash device while the machine is processing.
** When the machine is in process, the green LED’s will flash. When the program has finished
the green LED’s will stop flashing but will remain illuminated. If an error occurs the red LED
will illuminate.
3. Copy & Compare
It makes copy first and then compare target Flash devices with source Flash device to
ensure data correctness.
Compare
870M
21% 0:20 275M
Compare progress
Compare Size
Total Content Size
USB Duplicator
2. Compare
USB
3817M
Reading Content
OK
Compare
870M
21% 0:20 275M
TOTAL OK:1 NG:0
1:24 OK:1 NG:0
6
