3
Function Table
Function
Description
1.Quick Erase
Erase the INDEX of HDD, and take very short time.
2.Full Erase
Erase the whole HDD, including empty space.
3.DoD Erase
Erase HDDs thrice, complying with US Department of Defense's erase
standard DoD 5220.22-M(E).
4.DoD
EraseComp
Erase HDD thrice and compare once, complying with US Department
of Defense's erase standard DoD 5220.22-M(E).
5.Secure Erase
Erase whole HDD, even HPA/DOC or other area which are not
loadable, the international authorized high standard Secure Erase.
6.7 Pass Erase
Erase and overwrite whole HDDs for 7 times, complying with US
Department of Defense's erase standard DoD 5220.22-M(ECE).
7.Utility
7.1 Copy
Copy data from source to targets.
7.2 Compare
Compare bit-by-bit between source and targets to make sure
accuracy.
7.3 Copy+Compare
Copy and Compare source to targets and immediately compare after
7.4 Show Disk Info.
Show the information of connected HDDs, such as brand name, total
capacity, and etc.
7.5 Show System Info.
Show the information of the duplicator, such as controller model
number, software version, and etc.
7.6 System Update
Update the system firmware
8. Setup
8.1 Start-up Menu
Select which function is shown first when the system is turned on.
8.2 Copy Area
Setup copy mode.
8.2.1 System and Files
Set to copy source HDD's data area only to
save.
8.2.2 All Partitions