3
Function Introduction
12
c. When finishing copying, the copied result will be showed on the LCD.
Pass: 2 Fail: 0
Time 19:19
Quantity of copy pass
Quantity of copy fail
Total copied time
2.Compare
This function is used to check the correctness of the copying result. After
finishing copying, go to function 2 and press OK to start executing comparing
process.
DOM Duplicator
2.Compare
3.Copy+Compare
This function makes copy first and then compare copied target DOM with the
source DOM automatically to ensure the correctness of the copied result.
4.Erase
This function is used to delete the data in your DOM. Please choose the
appropriate erase method when you would like to dispose or reuse the DOMs.
DOM Duplicator
4. Erase
1.Function [6.3 Erase Master] is to determine if erasing source
DOM or not. The default setting is “Disable erase master ”.
2.The function can be stopped while processing by pressing
[ESC] for about 3~4 seconds.
