5
Function Table
Function
Description
1. Copy
To copy source HDD to multiple target HDDs. Refer to function
[6.1 Copy Area] for 4 different copy modes selection.
2. Compare
To compare data bit for bit between source and target HDDs.
3. Copy
+Compare
It makes copy first and then compare target HDD with source
HDD to ensure data correctness.
4. Erase
4.1 Quick Erase
To erase HDD’s index table only, it takes short time to execute
this function.
4.2 Full Erase
To erase the whole HDD content.
4.3 DoD Erase
To erase HDDs three times complying with USA Department of
Defense (DoD) standard.
4.4 DoD EraseComp
To erase HDDs three times complying with USA Department of
Defense (DoD) standard and bit by bit to check if data is
completely erased.
4.5 7-Pass Erase
Erases device(s) 7 times complying with DoD 5220.22-M(ECE)
Standards.
4.6 Secure Erase
The international authorized high standard Secure Erase
function. It is able to erase the area which is not loadable.
4.7 Enhanced Secure Erase
Erases devices that support this feature.
5. Utility
5.1 Show Device Info.
Displays basic information such as device model, name,
capacity, etc.
5.2 Update
System
5.2.1 Update BIOS
To update the system firmware via the HDD.
5.2.2 Create Update HDD
To format the HDD with a 2GB FAT partition in
order to quickly save the new firmware in the
HDD.
