14
6.2 Reduce Partition in Copy if necessary
This function can reduce the size of the last partition of an NTFS formatted hard
disk. If the capacity of the source disk is larger than the target, but the actual
data content does not exceed the capacity of the target, when the copy function
is executed, enable this function to reduce the content of the last partition
(must be NTFS) of the target in standard NTFS format.
Note
This function must meet the following conditions:
1. The format of the master hard disk must be standard MBR or GPT, and
the last partition is in NTFS format.
2. The actual data location in the master disk does not exceed the target
capacity.
6.3 Copy HPA Area
This menu contains submenus related to HPA Copy Modes
Scroll to select "Copy HPA Area”, then press "OK" to view the submenus. The
default setting is: “Copy and Setting”.
❶ Do Not Copy HPA
This menu contains submenu settings from which users can select.
Scroll to select "Copy HPA Area >> Do Not Copy HPA”, then press "OK" view
submenu settings.
⚫
Keep Target HPA
Does not copy HPA data, but keeps target device ‘s original HPA setting.
Scroll to select "Keep Target HPA”, then press "OK" to save this setting.
⚫
Clear Target HPA
Only copies the selected area.
Source
Duplication
Target
500GB
150GB
Unallocated
Partition
25%
35%
25%
35%
