23
Scroll to select "Erase Pattern >> One Byte”, then press "OK” to save this setting.
❷ Big Random Data
Random character written in a set of area.
Scroll to select "Erase Pattern >> Big Random Data”, then press "OK" to save this setting.
6.8.4 Skip Erase Errors
Skip source bad sectors during Erase. Bad sectors can be set as unlimited or at a value from
0 to 65,535.
Scroll to select “Skip Erase Errors”, and press “OK” to scroll through the available values for
skipping bad sectors.
6.8.5 Wait HDD Time
Sets device power up buffer time prior to copy, erase, etc...
Scroll to select "Wait HDD Time”, then press "OK" to set buffer time from 5 to 99 seconds.
The default is 30 seconds.
6.8.6 Lock Key
This function allows users to enable or disable the 4 control panel buttons.
Scroll to select "Lock Key”, then press "OK" to access available settings.
❶ Disabled
Scroll to select “Disabled”, then press “OK” to save this setting.
❷ Enabled
Only down/up buttons are disabled. Reboot system for setting to be in effect.
Scroll to select “Enabled”, then press “OK” to save this setting.
6.8.7 HPA Copy Mode
This menu contains submenus related to HPA Copy Modes
Scroll to select "HPA Copy Mode”, then press "OK" to view the submenus. The default
setting is: “Copy and Setting”.
❶ Do Not Copy HPA
This menu contains submenu settings from which users can select.
Scroll to select " HPA Copy Mode >> Do Not Copy HPA”, then press "OK" view submenu
settings.
⚫
Keep Target HPA
Does not copy HPA data but keeps target device ‘s original HPA setting.
