7
Function Introduction
3
1. Copy
It copies data from source HDD to target HDD. Please make sure you have
choose correct copy mode you like to use, about the three copy modes
please refer to function [6.1 Copy Area] for details.
2. Compare
It is used to check if the data on source HDD is identical to target HDD
after duplication.
3. Copy+Compare
It makes copy first and then compare copied HDD with source HDD to
ensure data correctness.
Before copy, there are two setups to be reminded:
a. Shows the quantity of bad sector in Source and Target HDDs.
Copy Process
(if there is any bad sector)
The default setting is "System and Files".
