Function Table
2
5
PRO118 Function Table
Function
Description
1. Copy
To copy source HDD to multiple target HDDs. Refer to function 6.Setup for 3
different copy mode selection.
2. Compare
To compare data bit by bit between source and copied HDDs.
3. Copy
+Compare
It makes copy first and then compare copied HDD with source HDD to ensure data
correctness.
4. Erase
4.1 Quick Erase
Erase HDD’s index table only, it takes short time to execute this function.
4.2 Full Erase
Erase the whole HDD content.
4.3 DoD erase
Erase HDDs three times complying with USA Department of Defense (DoD)
standard.
4.4 DoD EraseComp
Erase HDDs three times complying with n USA Department of Defense (DoD)
standard and bit by bit to check if data is completely erased.
5. Utility
5.1 Show Disk info
Shows HDD’s basic information such as HDD model name and capacity.
5.2 Update System
5.2.1 Update BIOS
To update the system firmware via the HDD.
5.2.2 Format HDD
To format the HDD with a 2GB FAT partition in order to
quickly save firmware in the HDD.
5.3 System Info
This function will show information of the duplicator system, including controller
model number and software version.
