17
④
Function Introduction
4.
Capacity Check
This function can check the real capacity of Flash media.
1
Plug the Flash media into slot and select function "4.Capacity Check", then press
"
OK" button. About 2~3 seconds, the system will find out its exact capacity.
2
System will show the checking result by Green/Red LED light.
3
You can use
▲▼
button to check the status of each slot.
4
This function supports asynchronous operation. You can continuously plug in and
pull out the flash media without pushing any buttons.
Green Light: Correct Size
Red Light: Wrong Size
Note
❶
The function may change the data and format of the flash media.
❷
To protect the source data, the system will not do Capacity Check on the master
device.
❸
When the Red light illuminates (Error), you can use
▲▼
to check the error
information.
5.
Information
5.1 USB Info.
This function will show Flash media's basic information such as media type, content
size, and total capacity.
Press
▲▼
buttons to check the information of each flash media including the source.