④
Function Introduction
16
3
When finishing copying, the LCD will show the total time of copy, quantity of pass
and quantity of copy fail.
Copy area setting
Copy Area
➡
7.2 Copy Area.
Select System and File or Whole Media.
Copy mode setting
Copy mode
➡
7.5 Asynchronous.
Select Enable or Disable asynchronous.
Note
When there is an error (Red LED on), you can also press
▲▼
key to check each
Flash media’s status. For example:
2.
Compare
Compare function is to check the correctness of copying result. The operation is the
same as copy.
3.
Copy + Compare
This function provides a more convenient selection. Instead of going to function "2.
Compare" and pressing
"
OK" button again after copying, function "3. Copy+Compare"
will automatically run the compare function after finishing copying to make sure if the
copied result is correct.
