Figure 3.
Fixing holes marking
2.
Prepare the place for installation mark and drill mounting holes (see
Mount recommendations
)
3.
Perform Ethernet wiring
4.
Perform power wiring if it is necessary
5.
Install and fix the enclosure cover with screws
6.
Attach self-adhesive washers over the screws
7.
Load the control panel in the U-Prox IP software (according to the
software manual)
8.
Download the control panel
9.
The device is ready for operation
Mounting recommendations
Mount the control panel in the place,
convenient for service.
To mount the control panel on the wall,
perform the following (Figure 3.):
Mark the holes using the tem
plate provided;
Fix the enclosure;
Connect wires
Template for device installation
-----------------------------------------------------------------------------------------------------------
