background image

Wartungsinformation / Maintenance Information

Nachziehen der Laufmatte

Nach einiger Benutzung wird die Laufmatte locker. 
In diesem Fall würde sie während der Benutzung 
verrutschen. Um die Spannung zu erhöhen, drehen 
Sie beide Schrauben ca. eine viertel Umdrehung 
im Uhrzeigersinn.

Zentrieren der Laufmatte:

Adjusting The Running Belt Tracking

CAUTION: Always unplug the power cord from the 
wall outlet before using the appliance clean or wait.

If the Running Belt tends to move off central during 
operation, step off the belt and stop the Treadmill. 

Start the Treadmill in Manual Programme Mode 
and adjust the speed to 3kph.

Take the 5mm Allen Wrench and adjust the Rear 
Roller Location Bolts, which are accessible through 
the Rear Frame Caps.

If the belt is moving towards the RIGHT side of the 
Treadmill Running Board, turn the RIGHT Rear Roller  
Location Bolt 1/4 turn CLOCKWISE and let the 
Running Belt find its new position. If it is still moving 
towards the RIGHT side of the Treadmill Running 
Board, turn the Bolt a further 1/4 turn.

If the belt is moving towards the LEFT side of the 
Treadmill Running Board, turn the LEFT Rear Roller 
Location Bolt 1/4 turn CLOCKWISE and let the 
Running Belt find its new position. If it is still moving 
towards the LEFT side of the Treadmill Running 
Board, turn the Bolt a further 1/4 turn.

Continue this operation until the Running Belt is 
running centrally.

Please take care to ensure that the Running Belt 
does not foul the Side Strips, as this will cause 
premature wear to both the Running Belt and the 
Side Strips.

‡$P(QGHGHV/DXIGHFNVEHILQGHQVLFK

Inbusschrauben, die für das Zentrieren gedacht 
sind.

‡/DVVHQ6LHGDV/DXIEDQGPLWFDNPKODXIHQ

ohne dass es benutzt wird.

‡'UHKHQ6LHLQHLQHP6FKULWWQLHPHKUDOVHLQH

viertel Umdrehung.

‡

Ist die Laufmatte nach rechts verrutscht, drehen 

Sie die rechte Einstellungsschraube eine halbe 
Umdrehung im Uhrzeigersinn.

‡

    Ist die Laufmatte nach links verrutscht, drehen
Sie die linke Einstellungsschraube eine halbe
Umdrehung im Uhrzeigersinn.

‡

    Gehen Sie nach dem Zentrieren ca. 5 Minuten 

EHLNPKDXIGHP/DXIEDOVWGLH/DXIPDWWHLPPHU

noch nicht zentriert, wiederholen Sie die Schritte.

Summary of Contents for MOTIVE FITNESS V-fit Speed Master 2.5





























Reviews: