Assembly / Aufbau
Insert the U-type Shaft (82) into the both up and down ends of the Safety Cover
(81). Attach the Safety Cover (81) to the Lower Fixed Tube (80) and the Upper
Fixed Tube (79), and rise the Upper Fixed Tube (79) to tighten the Safety Cover
(81), and then M8 x 15mm Hex Bolts (49) to fix the Upper Fixed Tube (79) on
the Weight Guide Tube (15).
1. Taking 1 x Weight Cover (17) and 1 x Weight Cover Support (82). Slide one
end of the Weight Cover Support through the stitched sleeve at either end of
the Weight Cover (17). Repeat this for the other end and the second Weight
Cover.
2. Now hook the bottom Weight Cover Support/Weight onto the Lower Cover
Bracket (80). Now Undo the 2 x M8 x 15mm Hex Bolts (49) on the Upper
Cover Bracket (79) allowing this to move down slightly, now hook the upper
Weight Cover Support/Weight Cover to the Upper Cover Bracket (79). Do the
same for the other side and now lift the Upper Cover Bracket (79) upwards so
the Weight Cover becomes tight.
7.
Befestigen Sie jeweils eine U-förmige Blende (82) am oberen und unteren Ende
der beiden Gitternetz-Abdeckung (81).
Schieben Sie die Gitternetz-Abdeckung (81) in die untere Halterung (80) und obere
Halterung (79). Schieben Sie nun die obere Halterung (79) ganz nach oben und
benutzen dann 2 x M8 x 15mm Sechskantbolzen (49), um die Gitternetz-Abdeckung
(81) an den Gewichte-Führungsstangen (15) zu befestigen.
37
Summary of Contents for MOTIVE FITNESS Multi-Gym SMART
