background image

USER GUIDE

Introduction

WELCOME TO U-LINE

Congratulations on your U-Line purchase! Your product comes from a company with decades of premium modular ice 
making, refrigeration, and wine preservation experience. U-Line creates products focused on functionality, style, and 
inspired innovations — paying close attention to even the smallest details. Applications include residential, outdoor, ADA 
height compliant, marine, and commercial. Product categories include Beverage Centers, Wine Refrigerators, Ice Machines, 
Refrigerators, Freezers, and Dispensers. Our advanced refrigeration systems, large and flexible capacities, and clean 
integrated look are what makes our products Built-In to Stand Out

®

. Since 2014, U-Line has been part of the Middleby family 

of brands. Products are designed, engineered, and assembled in Milwaukee, Wisconsin, USA, and select products are available 
worldwide.

U-Line — RIGHT PRODUCT. RIGHT PLACE. RIGHT TEMPERATURE.

®

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Spec Sheets, CAD Drawings, and Product Warranty 
information are available digitally on u-line.com.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following 
steps:

1. U-Line Customer Care must be contacted immediately at +1.414.354.0300.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been

altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

GENERAL INQUIRIES

U-Line Corporation
8900 N. 55th Street
Milwaukee, Wisconsin 53223 USA
Monday - Friday 8:00 am to 4:30 pm CST
T: +1.414.354.0300
Email: [email protected]
u-line.com

CONNECT WITH US

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 4:30 pm CST 
T: +1.414.354.0300 
Service Email: [email protected] 
Parts Email: [email protected]

Designed, engineered and assembled in WI, USA

3

Summary of Contents for UHRE524-IG81A

























































Reviews: