USER GUIDE
u-line.com
General Installation
Install Tower on Free-Standing Refrigerator
If your refrigerator is new out of the box, do not remove all
the protective film on the stainless exterior until the tower
is installed.
1. Remove four Phillips screws (secured with nuts on
the inside of the refrigerator) and lift off cap to reveal
tower mounting hole. Peel back enough film for tower
to clear.
2. Position gasket over mounting hole and install tower
using four Phillips screws and nuts.
3. Screw the handles onto the faucets and continue to
assemble and connect regulator to Nitrogen tank.
Gasket
11
