USER GUIDE
Interior Adjustments
Interior Adjustments
REMOVING AND INSTALLING SHELVES
Adjusting Interior Shelves
Models equipped with wire rack or glass cantilever shelves
have an adjustable mounting system. To adjust or simply
remove shelves for cleaning, follow the instructions below.
1. Remove all product from shelf.
2. Coming from underneath the shelf, lift both the front
and rear of the shelf.
3. Carefully slide shelf out of unit being careful not to
scratch the interior liner.
4. Installation is the reverse of removal.
Adjusting
Shelf Height
Shelf height may be adjusted to accommodate a broad
range of product. To alter your shelf spacing follow the
instructions below.
1. Remove the 4 Shelf clips from the shelf clip holes.
2. Move shelf clips as a group to the desired shelf height.
3. Insert shelf clips into the holes of the desired shelf
height. Be certain shelf clip is fully seated into shelf
clip hole.
Clips MUST be installed with the ribbed side
down. Failure to do so may result in shelf or unit
damage.
NOTICE
All 4 shelf clips for each shelf must be installed at
the same height for shelf stability.
4. Reinstall shelf.
Cleaning Shelves
Shelves may be cleaned in a soapy warm water solution. A
general household disinfectant may be used if necessary.
Be sure to completely dry your shelf before reinstalling.
Door Locking/Unlocking
Models equipped with locking doors can be set to the lock
position by inserting the included keys into the lock plugs
and rotating clockwise. To unlock, use the key to turn the
lock plug counter-clockwise.
Clip Holes
22
