![background image](http://html1.mh-extra.com/html/u-line/single-tap-tower-kit/single-tap-tower-kit_user-manual_3104896007.webp)
4
Install Tower on Countertop
(see template at the end of this user guide)
Note: Screws included with the kit will accommodate many different countertops. For a customized fit, it may be
necessary to acquire screws that are sized to the thickness of your countertop.
2. Use the dimensions from Diagram A to determine the centerpoint of the tower mounting hole.
1. Position keg refrigerator under countertop to determine the desired depth.
5. Drill 2-3/4" diameter hole through countertop.
3. Remove keg refrigerator from under countertop.
4. Use template to drill four mounting holes.
Front Face
of Refrigerator
Rear Wall
23-7/8”
11-15/16”
20-7/8”
2-7/16”
2-3/4”
Hole Diameter
12-1/2”
11-1/8”
Rear Wall
Countertop
Insulation
11-1/8”
Front edge of hole
to front face of
refrigerator
Beverage
Tube
8. Position keg refrigerator in front of opening and feed tubing into the uncapped opening.
10. Remove cap from top of tower and push insulation down into the keg refrigerator - see Diagram B.
11. Continue with CO
2
and beverage connections - see pages 5-6.
9. Slide keg refrigerator into place.
6. Insert tubing through provided gasket and into 2-3/4" hole.
7. Secure tower to countertop.
Diagram A
Diagram B
Insulation