background image

1

Introduction

U-Line Single and Double Tap Kits are designed to work with the U-Line keg refrigerator model 1224KEGRSOD. Tap kits      
can be installed directly on top of the keg refrigerator in a free-standing application or through a countertop in a built-in              

application. The 1224KEGRSOD is designed to fit up to one 1/4 slim barrel and one 1/6 barrel or one standard 1/4 barrel. It          
does not accept a 1/2 barrel or larger keg.

 

CAUTION

!

Safety and Warning

WARNING

!

CO

2

 can be dangerous. Handle with care.

Never exceed 60 PSI.
Most draft beers are dispensed between 8-14 
PSI and most stouts are dispensed at 30-14 PSI. 
Pressures above 50 PSI will release the built-in 
pressure relief.
Always connect CO

2

 tank to regulator. Never  

connect the tank directly to the keg.
Ventilate area after CO

2

 leak:

If it becomes difficult to breathe and your head 
starts to ache, high levels of CO

2

 may be present. 

LEAVE THE ROOM IMMEDIATELY.

Safety and Warning

Keep CO

2

 tank in an upright position. The regulator 

may break if the tank falls. 

Secure the CO

2

 tank

.

1/4 Slim Barrel

Quarter Slim

7.75 Gallons 

 82 - 12 oz. cups   

11.2” x 23.5”

1/6 Slim Barrel

Sixth Slim

5 Gallons 

 53 - 12 oz. cups   

9.25” x 23.5”

Standard 1/4 Barrel

Pony Keg

7.75 Gallons 

 82 - 12 oz. cups   

11.2” x 23.5”

Summary of Contents for Single Tap Tower Kit
















Reviews:

Related manuals for Single Tap Tower Kit