background image

PAGE 1 OF 2 

0515 IH-4694

π

  H-4694, H-4695

RIPACK HEAT GUN  

EXTENSION

1-800-295-5510

uline.com

ATTACH EXTENSION

1.  In order to use a Ripack Heat Gun Extension, you 

must first switch to the stronger, red-tipped igniter 

provided to you. To do so, press down on the black 

switch to release the trigger (See Figure 1). 

2.  Pull the trigger forward to expose black igniter  

(See Figure 2).

3.  Remove black igniter from chamber and replace 

with red-tipped igniter. Make sure the red tip is 

facing out (See Figure 3).

4.  Close the trigger.

5.  Now that the igniter has been changed, you can 

add the extension on the end of the gun. Start by 

removing the chrome combustion nozzle with a twist 

and pull motion.

6.  Attach extension at the end of the gun with a twist 

and push motion.

7.  Remove plastic protective cap from the end of the 

extension and replace with the chrome combustion 

nozzle. Your gun is ready for use.

Figure 1

Figure 2

Figure 3

Reviews: