PAGE 7 OF 32
0521 IH-2289
AVERAGE PIECE WEIGHT (APW)
When the
FUNCTION MODE
button is
released,
CLr.PW
Pcs
is displayed.
CLEARING A STORED APW
1. Press the
YES
button to clear the stored APW.
RECALLING A STORED APW
1. Press the
NO
button to recall the existing APW.
NOTE: Press the FUNCTION
MODE button to temporarily
display the APW value.
2. The display shows the sample size
PUt 10
Pcs.
ESTABLISHING A NEW APW
1. Press the
NO
button to increment
the sample size. Choices are 5, 10,
20, 50 and 100.
2. To establish the APW, place the specified quantity
of samples on the scale and press the
FUNCTION
MODE
button to capture the weight.
3.
APW
is displayed shortly followed
by the APW value with the current
unit of measure.
BEGIN COUNTING
1. Place the parts on the scale and
read the count. If a container is
used, be sure to tare the empty
container first.
PERCENT WEIGHING
Use this mode to measure the weight
of a sample as a percentage of a
reference weight.
REFERENCE WEIGHT
When the
FUNCTION MODE
button is
released,
CLr.rEF%
is displayed.
CLEARING A STORED REFERENCE WEIGHT
1. Press the
YES
button to clear the stored reference
weight.
RECALLING A STORED REFERENCE WEIGHT
1. Press the
NO
button to recall the existing reference
weight.
NOTE: Press the FUNCTION
MODE
button to temporarily
display the reference weight.
ESTABLISHING A NEW REFERENCE WEIGHT
The display shows
Put.rEF %
.
1. To establish the reference weight,
place the sample on the scale
and press the
FUNCTION MODE
button to capture the weight.
rEF.Wt
is displayed shortly
followed by the value with the
current unit of measure.
BEGIN PERCENT WEIGHING
1. Place the sample on the scale
and read the percent value. If a
container is used, be sure to tare
the empty container first.
CHECK WEIGHING
Use this mode to determine if
the weight of a sample is within
prescribed limits.
CHECK WEIGHING LIMITS
When the
FUNCTION MODE
button is
released,
CLr.rEF
is displayed.
CLEARING STORED CHECK WEIGHING LIMITS
1. Press the
YES
button to clear the stored limits.
RECALLING STORED CHECK WEIGHING LIMITS
1. Press the
NO
button to recall the
stored limits.
NOTE: Press the FUNCTION
MODE
button to temporarily
display the under and over
limit values.
OPERATION CONTINUED
0.123
kg
0.123
kg
APW
Pcs
APW
Pcs
PErCNt
CLr.rEF
%
12.345
kg
Put.rEF
%
rEF. t
. 100.00
%
CLr.rEF
kg
CHEC
110.000
kg
120.000
kg
