PAGE 2 OF 32
0521 IH-2289
SETUP
1. Remove red shipping tags located under metal pan.
(See Figure 1)
Figure 1
OPERATION
TURNING INDICATOR ON/OFF
1. To turn the indicator on, press the
ON/ZERO OFF
button. The indicator
performs a display test followed by a
series of informational displays and
then enters the active weighing mode.
2. To turn the indicator off, press and hold the
ON/ZERO
OFF
button until
OFF
is displayed.
MENU NAVIGATION
TO ENTER THE MENU MODE
1. Press the
TARE MENU
button until
MENU
is displayed. When the button
is released, the Legal for Trade status
is displayed, followed by the first
menu.
YES
Allows entry into the displayed menu.
Views menu item setting.
Accepts the displayed setting.
NO/BACK
Skips by the displayed menu.
Rejects the displayed setting and
advances to the next available item.
EXIT
Exits from menu directly to the current
application.
2. For menu items with numeric settings
such as capacity, the current setting
is displayed with all digits flashing.
Press the
NO
button to begin editing.
3. The first digit is displayed flashing.
4. Press the
NO
button to increment
the digit or press the
YES
button to
accept the digit and move to the
next digit.
5. Repeat this process for all digits.
6. Press the
YES
button when the last
digit has been set.
7. The new setting is displayed with all
digits flashing. Press the
YES
button
to accept the setting or press the
NO
button to resume editing.
8. This method also applies to setting check weigh
under and over targets.
9. For end menu items, pressing the
YES
button
advances to the next menu, while pressing the
NO
button returns to the top of the current menu.
CHANGE UNIT OF MEASURE
SET UNIT OF MEASURE AT STARTUP
Set the unit of measure displayed at startup to g, kg, lb., oz.,
lb:oz, t, c (custom unit) or auto (last unit in use when power
was turned off).
1. Once in the setup menu, press
NO
until the POWER ON UNIT setting is
displayed.
2. Press
YES
to enter the POWER ON UNIT setting.
3. Press
NO
until the desired unit of measure is
displayed.
4. Press
YES
to accept the new unit of measure.
NOTE: Units oz, lb:oz and C (custom) will not be
valid as Power On units when Range is set to
Dual. The next available unit will be displayed
instead.
NOTE: Default set to auto.
MENU
000000
0
00000
1
00000
10000
0
100000
