PAGE 1 OF 6
0820 IH-4989
π
H-4989
96
x
48" JUMBO
PACKING TABLE
1-800-295-5510
uline.com
LEGS AND FRAME ASSEMBLY
1. Insert adjustable feet (1) into legs (2) and slide into place
at desired height.
NOTE: If desired, insert locking tabs through legs
and adjustable feet to lock feet into place.
2. Place legs (2) in upright position. Legs should be placed
approximately 45" apart.
3. Attach stringer (3) to table legs using center six holes in
back legs. Fasten with 12 bolts, lock washers
and nuts, but do not fully tighten.
4. Place lower shelves (4) across braces of legs. Attach
lower shelves using 16 bolts and nuts. Now, fully fasten
hardware placed in step 3.
5. To attach tabletop (5) to frame assembly, place tabletop
on a smooth, non-marring surface with top side facing
down.
NOTE: If you have a Maple Jumbo Packing
Table, see Maple Tabletop Field Joint Assembly
instructions on page 2 before continuing to step 6.
6. Rotate the assembled frame upside down and line
up with the pre-drilled holes on the bottom side of the
tabletop.
ASSEMBLY
#
DESCRIPTION
QTY
1
Adjustable Foot
6
2
Leg
3
3
Stringer
1
4
Lower Shelf
2
5
Tabletop
1
1
4
2
5
3
TOOLS NEEDED
Phillips Head
Screwdriver
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
WARNING! These instructions are for Jumbo Packing Tables only. Instructions for Deluxe Workstations are
included with H-5777 Uprights for Deluxe Workstation.
7/16" Wrench
3/8" Wrench
10 mm Wrench
1/4" x 20 x 5/8" Bolt x 28
#14 x 3/4" Wood Screw x 24
1/4" x 20 Nut x 28
Lock Washer x 12
Locking Tab x 6
Hardware Kit
Flat Head
Screwdriver
