PAGE 2 OF 5
0222 IH-9975
2. Main pole must be extended first before an
extension pole can be added. To add an extension
pole, insert top of the extension pole into bottom of
the main pole.
NOTE: Extension pole is fully inserted when the
yellow locking pins click into place.
(See Figures 3-4)
Figure 3
Extension Pole
Main Pole
Locking Pin
Figure 4
NOTE: To attach dusting or squeegee tools to
telescopic pole, gooseneck attachment and
tool adapter must first be attached to the top
of main pole.
3. To attach gooseneck, flip open the locking clip at
the top of main pole, and loosen the connection as
needed by adjusting screw. Insert the gooseneck
into the pole. Close the locking clip and tighten
screw. (See Figures 5-6)
Figure 5
Figure 6
NOTE: Gooseneck can be bent 180 degrees.
To adjust the angle, flip open locking clip,
bend gooseneck to desired position and close
locking clip. (See Figure 7)
Figure 7
4. Press tool adapter onto gooseneck. It will click into
place. (See Figures 8-9)
Figure 8
Figure 9
NOTE: To convert this telescopic pole into a
water-fed pole for window cleaning, attach
optional Hydropower Tank and Brush (Uline
model # H-9976) assembly. See pages 3-5.
ASSEMBLY CONTINUED
Locking
Clip
Screw
Locking
Clip
Tool Adapter
Gooseneck
