PAGE 22 OF 69
1021 IH-9554
TECHNICAL DATA CONTINUED
COMPLIANCE
Compliance to the following standards is indicated by
the corresponding mark on the product.
MARK
STANDARD
This product conforms to the EMC
Directive 2004/108/EC, the Low
Voltage Directive 2006/95/EC and
the Non-Automatic Weighing
Instrument Directive 2009/23/EC.
The Declaration of Conformity is
available online at ohaus.com/en-US/
Support/Compliance-Documents/
CE-Declarations
AS/NZS CISPR 11
C
US
MC173467
CAN/CSA-C22.2 No. 61010-1-12, UL Std.
No. 61010-1 (3rd edition)
IMPORTANT! For verified weighing instruments
Weighing instruments verified at the place
of manufacture bear one of the preceding
marks on the packing label and the
green "M" (metrology) sticker on the
descriptive data plate. They may be put
into service immediately.
Weighing Instruments to be verified in two
stages have no green "M" (metrology) on
the descriptive data plate and bear one
of the preceding identification marks on
the packing label. The second stage of
the initial verification must be carried out
by an authorized and certified service
organization established within the
European Community or by the National
Notified Body.
The first stage of the initial verification has been carried
out at the manufacturers work. It comprises all tests
according to the adopted European standard EN
45501:1992, paragraph 8.2.2.
If national regulations limit the validity period of the
verification, the user of the weighing instrument must
strictly observe the re-verification period and inform the
respective weights and measures authorities.
DISPOSAL
Dispose of this product in accordance with local
regulations at the collecting point specified for
electrical and electronic equipment. If user has any
questions, contact Uline Customer Service at
1-800-295-5510.
Should this device be passed on to other parties
(for private or professional use), the content of this
regulation must also be related.
FCC NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
INDUSTRY CANADA NOTE
This Class B digital apparatus complies with Canadian
ICES-003.
M
M
M
M
1-800-295-5510
uline.com
