PAGE 4 OF 12
0621 IH-7160
OPERATION CONTINUED
TEMPERATURE/HUMIDITY TREND INDICATORS
The temperature (2°F/1°C) and humidity (3% RH) trend
indicators update every 30 minutes or less.
MANUAL WWVB RADIO-CONTROLLED
TIME SEARCH
• Press and release the
TIME SET
button to start or stop
a manual signal search.
• The WWVB Icon will flash.
For information about WWVB, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
LOW BATTERY ICON
NOTE: Low battery icon
indicates low
battery for station or sensor.
• Battery next to Outdoor Temperature, replace sensor
batteries
• Battery near Indoor Temperature, replace weather
station batteries
• Temperature has
risen
in the past 3 hours.
• Humidity has
risen
in the past 3 hours.
Rising
Trend
• Temperature has
not changed
in the past
3 hours.
• Humidity has
not changed
in the past 3 hours.
Steady
Trend
• Temperature has
fallen
in the past 3 hours.
• Humidity has
fallen
in the past 3 hours.
Falling
Trend
SPECIFICATIONS
INDOOR
Temperature Range
32ºF to 122ºF
Humidity Range
19% - 97% (RH)
OUTDOOR
Temperature Range
-40ºF to 140ºF
Alkaline Batteries
-20ºF to 140ºF
Lithium Batteries
-40ºF to 140ºF
NOTE:
Temperatures below -20ºF require lithium
batteries in the outdoor sensor.
Humidity Range
19% - 97% (RH)
Distance
Over 300'
RF 433MHz (open air)
POWER
Weather Station
Primary Power
AC/6 Number
5 volt AC power adapter (included)
Optional Battery
Backup
Optional 3 AAA, IEC, LR3 batteries
(not included)
TX141TH-BV2 Sensor
2-AA, IEC, LR6 batteries (not included)
BATTERY LIFE
Weather Station
Battery Backup
Battery life is over 36 months when using the
AC adapter for primary power.
TX141TH-BV2 Sensor
Battery life is over 12 months when using
reputable battery brands for both alkaline
and lithium batteries.
DIMENSIONS (L x W x H)
Weather Station
8.34 x 1.03 x 5.48"
TX141TH-BV2 Sensor
1.57 x 0.79 x 5.12"
MAINTENANCE
CAUTION! Do not mix old and new batteries.
• Do not mix alkaline, standard, lithium or
rechargeable batteries
• Always purchase the correct size and grade
of battery most suitable for the intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of
the device prior to battery installation.
• Ensure the batteries are installed with correct
polarity (+ and -).
• Remove batteries from equipment when it will
not to be used for an extended period of time.
• Promptly remove expired batteries.
• If the product is not working properly, change
the batteries and/or check the AC cord
connection.
1-800-295-5510
uline.com
