PAGE 3 OF 12
0821 IH-7098
SAFETY CABLE
A secondary support cable (not included) should be
installed anytime the fan is mounted overhead for
additional safety.
NOTE: Safety cable must go around the large
diameter wires of front and rear guards.
Other end of safety cable must be securely fastened to
a building joist, truss or beam near the fan. Take up all
necessary slack in the cable. (See Figure 4)
INSTRUCTIONS CONTINUED
MAINTENANCE
WARNING! Disconnect power before cleaning
or maintaining fan in order to prevent serious
injury or death.
• Excessive dust and debris may cause
overheating and reduced fan performance.
• Keep guards, motor and blades clean by
vacuuming or wiping with a damp cloth.
• Do not use harsh chemicals or cleaners to
clean any part of the fan.
• Pressure washing the unit will void the
warranty.
• Sealed motor bearings are pre-lubricated
and do not require servicing.
Figure 4
