PAGE 1 OF 12
0821 IH-7098
H-7098
HEAVY DUTY WALL MOUNT
FAN – OSCILLATING
1-800-295-5510
uline.com
SAFETY
CAUTION! Read all instructions carefully before
attempting to assemble, install, operate or
service the product. Failure to comply with
instructions could result in personal injury
and/or property damage. Using this product
for any other purpose than it was intended, or
not within the operating specifications in these
instructions will void the warranty and may
cause damage to the fan or serious injury to
personnel.
WARNING! To reduce risk of fire, electric shock
or personal injury:
• Do not expose fan to water or rain.
• Do not use this fan with any speed control
device.
• The power source must conform to the
electrical requirements of the fan.
• The power cord has a three-prong grounded
plug that must be plugged into a GFCI
(Ground Fault Circuit Interrupter) protected
circuit.
• Do not alter the plug to remove the
grounding prong and never use a two-prong
adapter.
• Replace damaged or worn power cords
immediately.
• Where possible, avoid using extension cords.
If one must be used, the cord must be
UL listed, be the proper size (Amp rating) and
have three-prong grounded connections.
• Before operating this fan, check for worn,
damaged or missing parts and replace or
repair as needed.
• Disconnect from power source before
servicing.
• This fan is intended for general use only.
Do not use near hazardous or explosive
materials or vapors.
• Never insert fingers or any other objects
through the guards when fan is in operation.
• Never operate fan without guards in place.
• Unplug the fan before moving from one
location to another.
• All warning and caution labels must be kept
in good condition and be replaced if not
clearly readable.
• Carefully read all safety messages in these
instructions and on equipment safety labels.
• Follow recommended precautions and safe
operating practices.
Para Español, vea páginas 5-8.
Pour le français, consulter les pages 9-12.
