PAGE 3 OF 9
0322 IH-6993
ASSEMBLY CONTINUED
9. Fasten tabletop to mounting plates with four wood
screws using a Phillips screwdriver, drill or 10 mm
wrench.
NOTE: For additional security, attach four remaining
wood screws to side panel mounting plate.
(See Figure 5)
10. Using a 10 mm wrench, attach front panel shelf
mount to front panel on each end by inserting one
M6 x 30 mm hex bolt and one small flat washer into
threaded nut. (See Figure 5)
NOTE: Place at same height as back panel
shelf mount.
11. Insert two bottom shelf panels. They should sit on the
lower shelf lip. (See Figure 6)
12. Insert the center shelf panels with the cut sections
facing the back left and back right corners of the
cabinet. (See Figure 6)
13. Disassemble door handle. Reassemble door handle
with lock bar. (See Figure 7)
Figure 6
Center
Shelf Panels
Bottom
Shelf Panels
Figure 7
1-800-295-5510
uline.com
Figure 5
Shelf
Mount
Side Panel
Mounting Plate
