PAGE 4 OF 21
0521 IH-6369
OPERATION CONTINUED
8. MyHome Modes – Preset humidity level settings
allow the user to easily move the dehumidifier room-
to-room and select the corresponding mode for
the location in which the dehumidifier is operating
for optimum performance. Press the MODE button
to choose from Sleeping Space, Living Space or
Basement.
9. Child-Lock Mode – To lock the control panel,
press and hold the TIMER button for 3 seconds.
Locking the control panel prevents someone from
accidentally changing the settings. When locked,
the Lock Indicator will light up. Press and hold the
TIMER button for 3 seconds to unlock the control
panel.
CONTINUOUS MODE
GARDEN HOSE INSTALLATION AND SETUP
Water can be automatically emptied by attaching a
hose to the continuous drainage port on the back of the
dehumidifier. This will allow the unit to run continuously
(depending on the selected humidity level) without
having to empty the water bucket. To drain, simply
attach a standard garden hose (not included). The
thread standard for garden hoses in the US and its
territories is known as GHT or "garden hose thread," which
has an outer diameter of 1⁄" and a pitch of 11.5 TPI.
• Place dehumidifier on a level surface.
• Unscrew the cap on the back of the unit to access
the garden hose nozzle
• Thread a garden hose (not supplied) onto the
accessible nozzle, lead to a floor drain and cut to
length.
• Make sure that there are no kinks or knots in the
garden hose. (See Figure 3)
• Turn on the unit and press the MODE button until set
to CONTINUOUS.
NOTE: Placing the dehumidifier on an uneven surface or improper hose installation may result in water
filling the bucket and causing the unit to shut off. Empty bucket if shut-off occurs, then check dehumidifier
location and hose for proper setup. The bucket must be in place and securely seated for the dehumidifier
to operate.
Figure 3
