0621 IH-5164
PAGE 4 OF 12
ASSEMBLY CONTINUED
Figure 10
14. While one person holds the table legs upright, insert
four screws through the holes in the bench channels
and into the bench as shown to keep the sliding end
caps under the glide rails. (See Figure 10)
NOTE: Do not overtighten. These screws help
keep the legs in the glide rails.
15. Repeat step 14 for the second bench seat.
16. Turn the table upright.
CAUTION! When using an umbrella with this
table, always anchor the umbrella to the
umbrella base.
1-800-295-5510
uline.com
