background image

PAGE 9 OF 18 

0721 IH-1820VND

H-1820

P3 ALL AROUND - PRESTO PALLET POSITIONER  

       

9

OPERATION NOTES

WARNING!  

Never sit or ride on the turntable or operate the unit if anyone is on it.

WARNING!  

Never operate the unit if the load is off center. The load may shift, and you may be injured. This 

can also damage the unit. 

WARNING!  

Keep the area around the unit clean.  Do not allow any dirt, debris, spilled oil, or excess grease to 

collect.  These materials may cause you to slip while the unit is operating, and you may be injured.

WARNING!  

Stay clear of the turntable when it is moving.  As the pallet turns, a part of the load may rotate 

around and hit you.  Never turn the load when anyone is standing beside the unit.

WARNING!  

Do not try to use this unit with damaged or broken pallets.  Broken pallets may have boards or 

nails which hang down below the main part of the pallet.  As the pallet is turned, these boards 

or nails may catch on the frame of the unit. This can cause the pallet to stop turning suddenly, 

causing the load to shift.
You may be injured, and the unit may be damaged.  The boards or nails on the bottom of the pallet 

should not extend down more than 1/8 inch.

AIR PRESSURE 

GAUGE

AIR PRESSURE 

RELIEF VALVE

MANUAL AIR 

DISCHARGE VALVE

VALVE STEM 

FOR AIR FILL

MANIFOLD 

VALVE

Figure A

Summary of Contents for H-1820



















Reviews: