PAGE 3 OF 9
0821 IH-1585
1. Place palms approximately 2"
below dispenser. (See Figure 19)
2. Product will be dispensed within
1 second of sensor activation.
3. To receive additional product,
remove hands from below
dispenser and repeat Step 1.
TO CLEAN
• Clean exterior surfaces of the dispenser using warm
water and mild soap.
NOTE: Do not use abrasive cleaners.
• Dry with a soft cloth.
USE AND CLEANING
TROUBLESHOOTING
OPERATING ISSUE
RECOMMENDATIONS
No dispense. Motor does not run.
Hands are not directly beneath
sensor.
No refill is loaded.
Incorrect refill is loaded.
Batteries are not loaded, or are
loaded incorrectly.
No dispense. Motor runs.
Refill is empty or is loaded
improperly.
Refill pump is not primed.
Figure 19
1-800-295-5510
uline.com
