PAGE 3 OF 3
0115 IH-1585
1. Place palms approximately 2"
below dispenser. (See Figure 19)
2. Product will be dispensed within
1 second of sensor activation.
3. To receive additional product,
remove hands from below
dispenser and repeat Step 1.
TO CLEAN
• Clean exterior surfaces of the dispenser using warm
water and mild soap.
NOTE: Do not use abrasive cleaners.
• Dry with a soft cloth.
USE AND CLEANING
TROUBLESHOOTING
OPERATING ISSUE
RECOMMENDATIONS
No dispense. Motor does not run.
Hands are not directly beneath sensor.
No refill is loaded.
Incorrect refill is loaded.
Batteries are not loaded, or are loaded
incorrectly.
No dispense. Motor runs.
Refill is empty or is loaded improperly.
Refill pump is not primed.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 19
