PAGE 2 OF 9
0222 IH-10002
ASSEMBLY INSTRUCTIONS
1. Verify all parts are present before beginning.
Hardware is attached to cross braces.
2. Flip the tabletop upside down. Take one leg at a
time and loosely attach the end of the leg to the
tabletop with the leg braces on an inside mount,
using one bolt, two washers and one nut.
(See Figure 1)
3. Before tightening the bolts, insert cross brace and
bolt to the table frame using one bolt, two washers
and one nut. (See Figure 2)
4. Flip the table upright and loosely attach the two
seats to the legs with the leg braces having an
inside mount, using one bolt, two washers and one
nut. (See Figure 3)
5. Ensure that the tabletop and seats are level, then
tighten each bolt, finishing with the cross braces.
Figure 1
Figure 2
Figure 3
