3. ATTACHING THE FULL OVERLAY PANEL
a. Tap nylon inserts into the top holes drilled in the wood panel.
Use two #6 screws (P/N 42122) to attach top pivot bracket
(P/N 12029) to the wood door panel (see Figure 3).
b. If required, attach optional cabinet handle hardware to the
wood door panel at this time.
c. Place and tape the existing door panel on the back of the
wood panel (see Figure 4) and drill holes through both panels
according to the diagram (see Figure 5). Remove tape from
the door panel, and enlarge the seven holes in the front panel
using a 0.201’’ (#7) drill.
TYPICAL WOOD PANEL
TOP PIVOT PLATE
#6 X 5/8" FLAT HEAD SCREW
TWO REQUIRED
8MM PLUG INSERT
TWO REQUIRED
Figure 3
DOOR PANEL
BOTTOM OF
WOOD PANEL
BACK OF
WOOD PANEL
SIDE OF
WOOD PANEL
TAPE
5/16" BOTTOM
3/8" BOTH SIDES
Figure 4
