U-Line DIGI-DAY S-21780, Manual, Page: 2 / 9

PAGE 2 OF 9 0621 IS-21780
OPERATION CONTINUED
STEP 3
SET THE NUMBER OF COUNT DAYS
• Press COUNT DAYS button. First segment number will
flash.
• Press remote's numbered buttons to enter desired
number of days. As each number is entered, the
next segment will flash. After entering numbers, press
ENTER button.
EXAMPLE: 357 days – Press COUNT DAYS button. Enter
numbers 0-3-5-7 for number of count days. Press ENTER
button.
NOTE: The leading zero(s) will not appear
during operation.
STEP 4
SET COUNT DAY TO CHANGE TO GREEN
• Press GREEN DAY button. First segment number will
flash.
• Press numbered buttons to enter desired number
count day to turn green (and subsequent numbers
will always be green). As each number is entered,
the next segment will flash.
• After entering numbers, press the green ENTER
button.
EXAMPLE: For 10 days, Press GREEN DAY button. Enter
0-0-1-0 for number of count days to change to green.
Press
ENTER button.
NOTE: Count Day(s) less than this number will be
red.
NOTE: In this example, Count
Day 1 through 9 will display
in red. On Count Day 10 and
beyond the display will be in green.
STEP 5
SET THE "ACTUAL TIME" OF DAY
• Press ACTUAL TIME button. Colon dots appear and
first segment number will flash. Display operates on
a 12-hour clock.
• Press ACTUAL TIME button again to select AM and
PM – bottom center LED indicator is green for AM
and red for PM.
• Press remote's numbered buttons to enter desired
time. As each number is entered, the next segment
will flash. After entering time, press
ENTER button.
EXAMPLE: 9:15 AM time – press ACTUAL TIME button to
turn LED indicator at the bottom center to be green,
then enter numbers 0-9-1-5 for for actual time of day.
Press
ENTER button.
NOTE: During operation, when it is PM, the
bottom center LED indicator will be red.
STEP 6
SET THE TIME FOR NUMBER OF COUNT DAYS TO
CHANGE
• Press COUNT TIME button. Top colon dot appears
and first segment number will flash. Display operates
on a 12-hour clock.
• Press COUNT TIME button again to select AM and
PM – bottom center LED indicator is green for AM
and red for PM.
• Press remote's numbered buttons to enter desired
time. As each number is entered, the next segment
will flash. After entering time, press
ENTER
button.
EXAMPLE: 11:59 PM time – press COUNT TIME button to
turn LED indicator at the bottom center to be red, then
enter numbers 1-1-5-9 for time for number of count days
to change. Press
ENTER button.
Count Up mode shown above. Count Down mode shown above.