PAGE 6 OF 38
1021 IH-5759
L-EXTENSION
1. Align leg holes to end of tabletop. Secure leg (2)
with six 1/4-20 x 5/8
"
bolts. Threaded inserts are
provided. (See Figure 12)
2. Secure L-leg (14) with four 1/4-20 x 5/8" bolts.
Threaded inserts are provided. (See Figure 13)
3. Set bench assembly upright and recheck all nuts,
bolts and screws for tightness.
NOTE: Do not lean on table. You may need to
prop up corner without leg until table is fully
assembled.
L-TABLE
1. Slide L-extension underneath base table on right or
left hand side. Make sure that table corners align
and that the six bolt locations closest to the center
of the leg align with the holes on the edge of the
base tabletop. (See Figure 14)
2. Attach L-leg (14) to underside of base table top (5)
with six nuts, bolts and lock washers.
STEEL TOP ASSEMBLY
Figure 12
Figure 13
Figure 14