QUICK START GUIDE
10
USER GUIDE
u-line.com
General Installation
Install Tower on Countertop
(See template on next page)
Note: These instructions are designed for a standard 36" countertop application.
Note: For a customized fit, it m y be necessary to acquire screws that are sized to the thickness of your countertop.
1. Position refrigerator under countertop to determine the desired depth.
2. Use the dimensions from Diagram A to determine the center point of the tower mounting hole.
3. Remove refrigerator from under countertop.
4. Use template to drill 4 mounting holes and drill 2-3/4" diameter hole through countertop.
5. If connecting to an external nitrogen and/or CO
2
source, prepare interior of refrigerator (see CONNECT EXTERNAL
NITROGEN SOURCE & CONNECT EXTERNAL CO
2
SOURCE) and connect to main source.
6. Remove top cap from refrigerator and carefully slide refrigerator under countertop.
7. Connect nitrogen and liquid lines to tower and feed lines through hole all the way into refrigerator
(see CONNECT HOSES TO TOWER).
8. Install adequate insulation between counter top and refrigerator - see Diagram B and note below.
9. Secure tower to countertop.
10. Continue with internal connections.
NOTE: For proper operation of your refrigerator, IT IS NECESSARY to install air-tight insulation between the refrigerator and
the tower. The insulation will need to run from the interior of the refrigerator up into the interior of the tower.
Front Face
of Unit
2
¾
”
(70 mm)
Hole Diameter
Power Cord
Nitrogen Line
(optional)
2”
(51 mm)
24”
(610 mm)
Rear Wall
24 1⁄8”
(613 mm)
12 ½”
(318 mm)
11 1⁄8”
(283 mm)
1 11⁄16”
(43 mm)
11 13⁄16”
(300 mm)
Rear Wall
Insulation
Front edge of hole to
front face of refrigerator
Countertop
11 1⁄8”
(283 mm)
Diagram A
Diagram B
