25
NEVER attempt to repair or perform maintenance on the unit until the main
electrical power has been disconnected.
1. Will not eject ice (water frozen)
Cause
Remedy
■
Control setting too cold
■
Adjust control warmer (counterclockwise)
■
Control defective (1-2 contacts open)
■
Replace control
■
Bin switch defective
■
Replace bin switch
■
Limit switch defective (open)
■
Replace limit switch
■
Ice maker assembly motor stalled
■
Replace motor
■
Broken wire in ice maker circuit
■
Repair or replace wiring
■
Water soaked cabinet insulation
■
Replace foamed cabinet assembly
■
Dirty condenser
■
Clean condenser
2. Will not fill with water
Cause
Remedy
■
Water supply valve closed
■
Open water supply valve
■
Water switch defective (open)
■
Replace water switch
■
Solenoid valve defective
■
Replace solenoid valve
■
Fill tube outlet frozen
■
Replace solenoid valve and defrost fill tube
■
Broken wire in water fill circuit
■
Repair or replace wiring
3. Will not stop making ice
Cause
Remedy
■
Bin switch defective (closed)
■
Replace bin switch
■
Bin arm binding
■
Lubricate bin arm pivot points or loosen
bin arm lever screw
4. Water will not stop filling
Cause
Remedy
■
Water switch defective (closed)
■
Replace water switch
■
Solenoid valve defective
■
Replace solenoid valve
■
Stalled ice maker motor
■
Replace motor
■
Temperature control defective.
■
Replace temperature control
Ice maker is in continuous harvest
cycle (contacts 1-2 closed)
5. Ejector blades will not stop turning
Cause
Remedy
■
Control defective (1-2 contacts will
■
Replace control
not open)
■
Hold switch defective
■
Replace hold switch
■
Defective wiring
■
Repair or replace wiring
■
Short in mold heater
■
Replace heater
!
!
TROUBLESHOOTING
