background image

USER GUIDE

Integrated Panel Dimensions 4

u-line.com

SAFETY •

INSTALLATION & INTEGRATION

 • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

EXTENDED INTEGRATED PANEL

NOTICE

Due to differences in surrounding cabinetry the 
panel may not perfectly align with door. The 
procedure below is designed to provide a 
finished panel that seamlessly integrates with 
surrounding cabinetry.

Panel Preparation 

An extended integrated panel can be used to maintain 
alignment with an adjacent extended cabinet height or a 
reduced toe-kick/grille application.

1. Cut the panels to the dimensions listed in the 

appropriate diagram on the next page.

2. Optional: Stain or finish panel to desired stain or color. 

Be sure to closely follow the instructions provided by 
the manufacturer.

3. Optional: Install handles and hardware.

NOTICE

The door panel must not weigh more than 20 lbs 
(10 kg).

It is important to ensure that all drilled holes are 
drilled to the correct depth in order to avoid 
splits in the wood when hardware is installed. 

Appliance will need up to 34-1/2" (876 mm) to 
the underside of the counter to leave room for 
leveling adjustments.

When applying an integrated panel to a unit, 
ensure that both sides are finished in order to 
prevent warping. In some installations, the 
panel may be visible through the glass while the 
door is open.

Summary of Contents for 3018WC














Reviews: