USER GUIDE
Control Operation - Service 8
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
Fan Delay
The Fan Delay menu option allows the modification of fan
run times during and after a cooling cycle. In order to
allow time for the evaporator to properly cool, the
evaporator fan is delayed from starting with the cooling
cycle for a given amount of time. In order to remove as
much warmth as possible from the cabinet the evaporator
fan will continue to run at the end of the cooling cycle for
a given amount of time.
Fan Delay On=
“Fan Delay On” is the amount of time in minutes the fan
will be delayed from starting from the beginning of a
cooling cycle.
Fan Delay Off=
“Fan Delay Off” is the amount of time in minutes the fan
will continue to run at the end of a cooling cycle.
To access Fan Delay
1. Use Down to select “Fan Delay”.
2. Press Select .
To alter fan settings.
3. Use Down to select either “Fan Delay On” or “Fan
Delay Off” and press Select . The chosen option will
begin to flash.
4. Press Up or Down to change settings.
5. Press Select to confirm.
To exit Fan Delay use Up to select “Return to Menu”
and press Select to confirm.
USB Port
The USB Port menu option allows the selection of a
communication mode. The 3000 Series can communicate
either via TTY to a PC or log diagnostic information
directly to a USB flash disk.
To access USB Port
1. Use Down to select “USB Port”.
2. Press Select .
To alter communication settings.
3. Use Down to select the current setting and press
Select .
4. Press Up or Down to change settings.
5. Press Select to confirm.
To exit “USB Port” use Up to select “Return to Menu”
and press Select to confirm.
Up
Select
Down
RETURN TO MENU
FAN DELAY
FAN DELAY ON = 1
FAN DELAY OFF = 2
ID
Communication
PC Link
PC TTY
Flash
USB Flash Drive
Up
Select
Down
RETURN TO MENU
USB PORT
PC Link
