U-Line 3018RGL User Manual Download Page 43

USER GUIDE

 Ordering Replacement Parts 1

u-line.com

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • 

SERVICE

Ordering Replacement Parts

Parts may be ordered on-line, by Fax or on the phone. 
See our contact information below:

www.U-LineService.com (with service login)
FAX Number: +1.414.354.5696
Phone Number: +1.800.779.2547

NOTICE

Use only genuine U-Line replacement parts. The 
use of non-U-Line parts can reduce speed of ice 
production, cause water to overflow from ice 
maker mold, damage the unit, and void the 
warranty.

Warranty parts will be shipped at no charge after U-Line 
confirms warranty status. Please provide the model, serial 
number, part number and part description. Some parts 
will require color or voltage information. 

If U-Line requires the return of original parts, we will 
inform you when the parts order is taken. This 
requirement will be noted on your packing list. A prepaid 
shipping label will be included with the replacement part. 
Please enclose a copy of the parts packing list and any 
labor claims with your return. Please be sure the model 
and serial numbers are legible on the paperwork. Tag the 
part with the reported defect.

When ordering a non-warranty part, you will need an open 
account and tax exemption on file at U-Line. Another 
option would be to visit www.u-line.com to locate an 
authorized parts distributor in your area.

Summary of Contents for 3018RGL














































































Reviews: