background image

U-Line Safety Precautions

1

IMPORTANT

IMPORTANT

• PLEASE READ all instructions before installing, 

operating, or servicing the appliance.

• Proper installation procedures must be followed when 

completing an installation or relocation of a unit. 
Consult the installation guide before any installation 
begins. U-Line contact information appears on the rear 
cover of this guide.

• This unit requires connection to a dedicated 15 Amp 

grounded (three-prong), polarized receptacle, installed 
by a qualified electrician, compliant with applicable 
electrical codes.

Safety Alert Definitions

Throughout this guide are safety items labeled with a Danger, 
Warning or Caution based on the risk type:

DANGER

Danger means that failure to follow this safety statement will 
result in severe personal injury or death.

WARNING

Warning means that failure to follow this safety 
statement could result in serious personal injury, 
property or equipment damage. 

CAUTION

Caution means that failure to follow this safety statement 
may result in minor or moderate personal injury, property 
or equipment damage.

2 Safety Precautions

General Precautions

Use this appliance for its intended purpose only and follow these 
general precautions with those listed throughout this guide:

DANGER

RISK OF CHILD ENTRAPMENT. Before you throw away your 
old refrigerator or freezer, take off the doors and leave shelves 
in place so children may not easily climb inside.

WARNING

SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform maintenance on 

the unit until the electricity has been disconnected.

• Never remove the round grounding prong from the 

plug and never use a two-prong grounding adaptor.

• Altering, cutting of power cord, removal of power 

cord, removal of power plug, or direct wiring can 
cause serious injury, fire and or loss of property and 
or life, and will void the warranty.

• Never use an extension cord to connect power to the 

unit.

• Always keep your working area dry.

WARNING

Install provided Anti-Tip kit on all Wine Captain 
Models and Glass Door Refrigerators. Serious personal 
injury could occur.

CAUTION

• Use care when moving and handling the unit. Use gloves 

to prevent personal injury from sharp edges.

• If your model requires defrosting, DO NOT use an ice 

pick or other sharp instrument to help speed up 
defrosting. These instruments can puncture the inner 
lining or damage the cooling unit. DO NOT use any type 
of heater to defrost. Using a heater to speed up 
defrosting can cause personal injury and damage to the 
inner lining.

IMPORTANT

IMPORTANT

• Do not lift unit by door handle.
• Never install or operate the unit behind closed doors. 

Be sure front grille is free of obstruction. Obstructing 
free airflow can cause the unit to malfunction and will 
void the warranty.

• Failure to clean the condenser every six months can 

cause the unit to malfunction. This could void the 
warranty.

• Allow unit temperature to stabilize for 24 hours before 

use.

• Do not Block any internal Fans

Use only genuine U-Line replacement parts. Imitation 
parts can damage the unit, affect its operation or 
performance and may void the warranty.

Summary of Contents for 2000 SERIES





















Reviews: