background image

USER GUIDE

Introduction 1

u-line.com

WELCOME TO U-LINE

Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations 
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American 
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine 
use. U-Line’s complete product collection includes modular Wine Captain

®

 Models, Beverage Centers, Clear Ice Machines, 

Crescent Ice Makers, Glass & Solid Door Refrigerators, Drawer Models, Freezers, and Combo

®

 Models.

U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations 
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design, 
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach, 
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is 
proud to have the opportunity to ship to you.

PRODUCT INFORMATION

Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Compliance 
Documentation, and Product Warranty information are all available for reference and download at u-line.com under 
Documentation.

PROPERTY DAMAGE / INJURY CONCERNS

In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following 
steps:

1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been 

altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.

SERVICE INFORMATION

Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our 
Customer Care group directly, contact information below.

GENERAL INQUIRIES

U-Line Corporation
8900 N. 55th Street
Milwaukee, Wisconsin 53223 USA
Monday - Friday 8:00 am to 4:30 pm CST 
T: +1.414.354.0300 
F: +1.414.354.7905
Email: [email protected]
u-line.com

SERVICE & PARTS ASSISTANCE

Monday - Friday 8:00 am to 5:30 pm CST
T: +1.800.779.2547 
F: +1.414.354.5696
Service Email: [email protected]
Parts Email: [email protected]

CONNECT WITH US

Designed, engineered and assembled in WI, USA

Summary of Contents for 1224DWR


































Reviews: