SEQUENCER
Snapshot Values
To the right of the dial are 16 sliders used for editing the contents of each snapshot:
16 sliders
Select a snapshot with the dial, then edit its values using the sliders. Tip: The easiest way to
use the sequencer for precise semitones is to set the oscillator pitch modulation amount to
50.00 and the sliders to double the transposition you want – up a tone would be +4, up a fifth (7
semitones) would be +14, up an octave would be +24 etc..
4 tap outputs
The four output sockets let you divide the sequencer into shorter sections, which can then be
used to modulate different target parameters. Each section can run at a different speed...
4 tap speed factors
The lengths of steps in each tap can be multiplied by setting this number higher than 1. Note
that the speed factors of unused taps are simply ignored. To compensate for doubling the speed
factor you can also double the value of
.
39
tap speed factor
4 taps (output sockets)
16 bipolar sliders
