u-he Bazille User Manual Download Page 4

Page: 4 / 65

TOC

INTRODUCTION

Introduction

To follow this user guide it helps if you already know a thing or two about patching modular synths,

as well as the basics of FM and PD (phase distortion) synthesis. If you have any questions that an

Internet search can’t answer, please feel free to post a message in our

user forum at KVR

Installation

Go to the

Bazille

product page at u-he.com, download the appropriate installer for your computer

and unzip the compressed file. Open the

Bazille

folder and start the installer app.

The only demo restriction is a mild crackling that occurs at irregular intervals after about two

minutes of use. The demo is otherwise fully functional. Those crackles disappear after you have

entered a serial number. For more information, refer to the

ReadMe

file included with the installer.

CPU usage and audio quality

As a polyphonic modular synth, Bazille can be quite CPU-hungry! Monophonic operation without

voice stacking should be fine, even on older computers. Activating

Multicore,

which distributes

voices evenly across all available CPU cores, can help maximize the number of playable voices.
Note: Due to inherent technical limitations of the synthesis method, Bazille’s PD-based oscillators

are prone to aliasing. If you have Bazille installed on a high-performance system you should try

activating the

(higher quality) option.

Better Bazille

Early Bazille adopters should notice some improvements in this version, especially the powerful

new preset browser. The minor fixes include much better envelope LFO-triggering. Although this

particular fix affects some old patches, we feel that it was worth implementing – especially in such

a “geek machine” as Bazille! See the

explanation

in the Tips & Tricks chapter.

Summary of Contents for Bazille


































































Search results

Summary of Contents for Bazille

Reviews:

Related manuals for Bazille

Brands by name

Popular brands

u-he Bazille, User Manual

Search results

Summary of Contents for Bazille

Reviews:

Related manuals for Bazille

Brands by name

Popular brands