u-he Bazille User Manual Download Page 13

Page: 13 / 65

TOC

PATCH BROWSER

Smart Folders

The other folders do not contain files, but display the results of querying a database of presets.

The content is therefore dynamic i.e. it will change whenever the underlying data changes.

Search History

Click on this folder to display the results of past searches (maximum 10). Whenever you need to

make the results of a search more permanent, right-click and select

Save Search...

The entry

will be moved to the ‘Saved Searches’ folder – see below. To remove all searches from the list,

right-click on the ‘Search History’ folder and select

Clear

Saved Searches

This folder contains searches that have been saved via right click from the Search History. To

remove individual saved searches, right-click on the search and select

Delete

Tip: Entries dragged from Saved Searches and dropped onto real folders within Local or User

will create a folder containing real copies of all found presets.

Favourites

8 smart folders, colour-coded. See

Presets context menu

on the next page. Presets dropped

onto a Favourites folder will be marked as such.

Favourite status can be removed by right-clicking on individual

Favourite

folders and selecting

‘Remove all Favourite (n) Marks’.

Junk

A smart folder pointing to all junked presets. See Presets context menu on the next page.

Presets dropped onto this folder will be junked, and will therefore disappear from the rest of the

browser unless made visible (see

Show Junk

in the Presets context menu).

All Junk marks can be removed at once by right-clicking on the

Junk

folder and selecting

‘Remove All Junk Marks’. If hidden, previously junked presets will reappear in the browser.

Tags

Smart folders for each Category/Subcategory, Features and Character tag. Presets dropped

onto these folders will adopt the corresponding tag. Presets dropped onto the ‘Untagged’ folder

will have all Category/Subcategory, Features and Character tags removed.

Author

Smart folders for each Author. Tip: Instead of signing each of your creations, you could sign just

one of them, then select them all and drag onto ‘Author/(You)/’. As the process cannot be

undone, please use this feature with caution!

Directory context menu

Right-click on any folder within ‘Local’ or ‘User’ to open this menu:

Refresh

: Update the contents of the browser.

Create New

: Insert an empty subdirectory.

Rename

: Edit the folder name.

Open in Finder

Explorer

: Open a system window for the currently

selected folder. Hold down

option

(Mac) or c

trl

(Windows) to switch this

Show in Finder / Explorer

, which highlights the folder instead of

opening it.

Refresh
Create New…
Rename…
Open in Finder *

Move to Trash

On Open Expand to

Show Folder Icons

Summary of Contents for Bazille


































































Search results

Summary of Contents for Bazille

Reviews:

u-he Bazille, User Manual, Page: 13 / 65

Search results

Summary of Contents for Bazille

Reviews: