4)
Always unplug this product from the appliance before
performing any maintenance or cleaning operation.
5)
Failure to periodically clean the BioStack filter will
adversely affect the performance of the appliance.
Follow the instructions in this manual.
6)
If the unit has been without power for an extended
period of time (e.g. due to a malfunction), replace the
water and U-Ox.
7)
Water should only be poured into the center cylinder,
except for adding small amounts.
13.2. Improper use
Any use of the appliance not covered by this manual is
considered incorrect. This appliance complies with
current safety regulations. Improper use of the applian-
ce could result in personal injury and property damage.
Please read the operating instructions carefully before
operating the appliance. They contain important safety,
operating and maintenance information. This will protect
you and prevent damage to the machine itself.
The manufacturer cannot be held liable for damage
caused by failure to observe the safety instructions and
warnings.
1)
Do not place AIRcel70 in areas subject to freezing
temperatures. Frozen pipes may tear or burst, and the
reliability of electronic equipment may be reduced at
temperatures below freezing.
2)
Never use cleaning agents containing solvents to
clean the AIRcel70 (e.g., benzene) as this may damage
device components and release hazardous fumes.
3)
Do not use cleaning agents containing solvents near
or directly on AIRcel70 (e.g., benzene). Plastic/metal
surfaces in contact with the product may be damaged.
4)
Do not place any type of object on top of the
appliance or inside grill.
5)
Do not use abrasive or corrosive materials to clean
the exterior surfaces of the appliance.
6)
Do not apply any voltage or frequency to the
appliance other than those indicated in the specifica-
tions.
7)
Do not introduce liquids or other substances other
than U-Ox or water into the tank; this could irreparably
affect the performance of the appliance.
13.3. Cleaning and care
The customer may only carry out the cleaning and care
of the device described above. Any other operation
shall be delegated to a technician authorized by the
manufacturer.
13.4. Support in case of failure
In case of defects or malfunctions of the device, please
contact
13.5. Electrical Connection
AIRcel70 is equipped with a connection cable and a
plug. The power plug must always be accessible to
disconnect AIRcel70 from the main power supply. The
device may only be connected to an electrical system
that complies with the applicable regulations.
AIRcel70 must not under any circumstances be connected
to extension cables, e.g. multi-socket plug, in order to
avoid any possible source of danger (fire hazard). The
nameplate gives details of the rated input power. Com-
pare the data on the nameplate with the data from the
main power source.
13.6. Handling
If you decide to move the appliance after its installation,
be sure to take all appropriate precautions for its safe
handling. In particular, pay attention when lifting the unit,
always use both hands, and check that the supporting
surface is free from sharp or protruding objects. Also
remember to ensure a controlled movement to pre-
vent back injury, taking a bent position on the knees
and keeping the back erect if the weight to be lifted is
below the plane of the knees.
In addition, the use of personal protective equipment
such as gloves is necessary.
13.7. Residual risks and warnings
It is forbidden to tamper with or alter the unit.
11
