U-Earth Biotech AIRcel70, User Manual

Page: 6 / 16

5. Remove the BioStack™ filter from the tank;
6. Remove the protections from the bottom of the BioStack™ filter (these protections prevent damage to the pump
during transport);
7. Replace the BioStack™ filter in the tank;
8. Add water to the center of the BioStack™ until it reaches the maximum level indicated on the metal plate.
Water should be poured through clean containers used only for water, not previously used to hold other substances
such as household or personal cleaners, chemicals or food;
9. Shake a single dose of U-Ox™ well and pour the entire contents of the bottle into the middle part. In order to
ensure that the air cleaning remains effective, the unit should be refilled with a single dose of U-Ox™ every month .
Use only genuine U-Earth enzymes;
10. Once the unit is full of water and refilled with the single dose of U-Ox™, place the cover on the side of the tank and
reconnect the cable by screwing the connector;
11. Insert the cover in its seat, connect the cable to the power supply and turn on the machine with the power
button.
Congratulations, your AIRcel70™ is purifying the surrounding air
and creating a Pure Air Zone.
Water evaporates during the bioxidation process and must be supplied regularly.
You can choose to add a little water each day or a larger amount of water at regular intervals by following Step 1
through Step 11 (skipping Step 9).
NOTE: To add small amounts of water, you do not need to unscrew the connector and remove the cover completely;
just move the cover and lay it on its side, as shown in the follomwing picture.
It is necessary to add U-Ox™ every month; the tank should be emptied and cleaned every 4 months.
While the machine is running, the blue light is on, indicating that the device is working properly. However, you can
turn off the light by pressing the button on the front of the lid. When the water level reaches the minimum, a red light
will come on and the device will stop.
User Manual - AIRcel70™ 5